Atop-technology SE5416A User manual Manuale Utente Pagina 80
- Pagina / 113
- Indice
- SEGNALIBRI
Valutato. / 5. Basato su recensioni clienti
Atop Industrial Serial Device Server
SE5408A/SE5416A Series
User Manual V 1.0
80
Serial/IP Virtual COM’s Control Panel later.
7.2.2 TCP Server Application: Enable RFC 2217
The underlying protocol of Virtual COM is based on RFC 2217, the Telnet COM Control Option.
Therefore, it is possible to use RFC 2217 with SE5416A Series in the TCP Server mode. To do
so, refer to Sec 7.2.1 to enable Virtual COM, so that SE5416A Series becomes aware of the
commands. Note that there is no need to configure Virtual COM on the Operating System
because Virtual COM ports would not be used.
7.2.3 TCP Client Application: Enable Virtual COM
It is also possible to run VCOM in TCP Client mode. It is usually easier to use Virtual COM in
the Client mode if SE5416A Series uses dynamic IP (DHCP) because setting a static IP
address in Virtual COM’s Control Panel in the Operating System is not possible.
Figure 7.8
Follow Sec. 7.1.2 to configure SE5416A Series in TCP Client mode properly.
Click on the dropdown box of the Mode option and switch to “Virtual COM” to enabled
- SE5416A Series 1
- User’s Manual 1
- Important Announcement 2
- Disclaimer 2
- Published and Printed by 2
- Content 3
- 1 Preface 8
- 2 Introduction 10
- Caution 11
- 2.2 Features 11
- 3 Getting Started 12
- 3.2 Inside the Package 13
- 3.4 First Time Installation 15
- 3.5 User Interface Overview 16
- 3.6 Factory Default Settings 17
- 4 LCM Configuration 18
- 4.2.1 Overview 19
- 4.2.2 Network Settings 19
- 4.2.3 Serial Settings 20
- 4.2.4 Server State 23
- 4.2.5 Restart 23
- 5 Web Configuration 24
- 5.2 Overview 25
- 5.3 Network Configuration 28
- 5.4 Serial 34
- 5.4.1 COM Configuration 35
- Attention 38
- 5.5 Alert Settings 40
- 5.5.2 Alert Event 41
- 5.6 System Configuration 42
- 5.6.2 Log Settings 43
- 5.6.3 System Log 45
- 5.6.4 COM Log 45
- 5.6.5 Time Settings 46
- 5.6.7 Import/Export 48
- 5.6.8 Set to Default 49
- 5.6.9 Restart 49
- 6 CLI Configuration 50
- 6.2 General Information 51
- 6.3 Welcome Screen 52
- 6.4 Main Menu Structure 52
- 6.4.1 Overview 53
- 6.4.2 Network Settings 53
- 6.4.3 Serial Settings 54
- 6.4.4 Server State 57
- 6.4.5 Restart 57
- 6.5.1 LAN 1 / LAN 2 Settings 59
- 6.5.2 DNS Settings 60
- 6.5.3 SNMP Settings 60
- 6.5.4 Bridge Settings 61
- 6.5.5 ERPS Settings 61
- 6.5.6 STP Settings 63
- 6.6 COM Port Configuration 64
- 6.6.3 UDP Link Mode 65
- 6.6.4 Serial Settings 65
- 6.7 Alert Settings 66
- 6.8 System Configuration 68
- 6.8.2 Time Settings 69
- 6.8.3 Security Settings 69
- 6.10 Restart System 70
- 7.1 Link Mode Configuration 71
- 7.1.1 TCP Server Mode 72
- 7.1.2 TCP Client Mode 75
- 7.1.3 UDP Mode 77
- 7.2 Link Mode Applications 79
- Connection Master 81
- Connection Slave 82
- Connections 87
- 8.1 Enabling VCOM 88
- 8.1.1 VCOM driver setup 90
- 8.1.2 Limitations 90
- 8.2 Enabling Virtual COM 91
- 8.2.3 Configuring VCOM Ports 95
- 8.2.4 Exceptions 96
- 8.3.2 The Activity Panel 103
- 8.3.3 The Trace Panel 104
- 9 Specifications 107
- 9.2 Software 108
- 9.3 Pin Assignments 108
- 9.4 LED Indicators 111
- 9.5 Buzzer 111
- 10 Upgrade System Firmware 112
- 11 Warranty 113
Prodotti e manuali riguardandi Hardware del computer Atop-technology SE5416A User manual
(2 pagine)StarTech.com ISAS88701 manuels
Manuels d'utilisation et guides de l'utilisateur pour Câbles SAS (Serial Attached SCSI) StarTech.com ISAS88701.
Nous fournissons des manuels en pdf 1 StarTech.com ISAS88701 à télécharger gratuitement par type de document : Fiche technique
Commenti su questo manuale